How to Maintain The Solder Paste Mixer?

The solder paste mixer can effectively mix the solder powder and flux paste. The solder paste is removed from the refrigerator without the need to reheat the paste, eliminating the need for reheating time. The water vapor also dries naturally during the mixing process, reducing the chance of absorbing water vapor without opening the can, and the mixing effect is excellent. Then, in order to better improve the efficiency of the use of solder paste mixer, you should do a good job of the usual maintenance of the solder paste mixer.

I. Solder paste mixer maintenance cycle

Solder paste mixer equipment once every six months for inspection, and make detailed records for inventory.

Inspection content.

a. equipment appearance is good

b. system function is complete

c. whether the parts are damaged

d. safety operation performance is good

e. whether the technical control parameters are reliable

f. whether to meet the requirements specified in the product or service

g. whether the machine moving parts are well lubricated.

II. The solder paste mixer maintenance precautions

a. Do not put the machine in a humid, high-temperature place, to keep the machine surface clean

b. Take care when carrying the machine, the machine should be smooth and clean at work.

c. when loading solder paste cans, staff should lock the latch to prevent the occurrence of outside.

d. Do not place too heavy things on the top cover of the machine to prevent the protection switch from being crushed.

e. To wait for the motor to completely stop rotating before you can take out the solder paste cans to prevent the operator from being hurt

f. Sealed bearings, do not need frequent lubrication and maintenance.

g. Listen to the sound during the work of the machine, if there is a “rumble” sound, it proves that the solder paste bottle is not placed properly, or the weight of the jig is too much different from the weight of the solder paste, there is an imbalance, should immediately stop work to reinstall the solder paste bottle or replace the jig.

h. Do not open the cover of the machine in the running state to avoid the paste bottle from being thrown out and injuring people.

i. Keep the machine clean after use

j. No stopping if there is no special condition during the operation of the equipment.

full auto SMT production line


Post time: Jan-18-2022

Send your message to us: