Company news

  • What Is The Difference between SPI and AOI?

    What Is The Difference between SPI and AOI?

    The main difference between SMT SPI and AOI machine is that SPI is a quality check for paste presses after stencil printer printing, through the inspection data to solder paste printing process debugging, verification and control; SMT AOI is divided into two types: pre-furnace and post-furnace. T...
    Read more
  • SMT Short Circuit Causes and Solutions

    SMT Short Circuit Causes and Solutions

    Pick and place machine and other SMT equipment in the production and processing will appear a lot of bad phenomena, such as monument, bridge, virtual welding, fake welding, grape ball, tin bead and so on. SMT SMT processing short circuit is more common in fine spacing between IC pins, more common...
    Read more
  • What’s The Difference Between Reflow and Wave Soldering?

    What’s The Difference Between Reflow and Wave Soldering?

    NeoDen IN12 What is reflow oven? Reflow soldering machine is to melt the solder paste pre-coated on the solder pad by heating to realize the electrical interconnection between the pins or welding ends of electronic components pre-mounted on the solder pad and the solder pad on the PCB, so as to a...
    Read more
  • How Much Does A Pick and Place Machine Cost?

    How Much Does A Pick and Place Machine Cost?

    The amount of automatic pick and place machine depends mainly on the following factors: 1. Origin of SMT machine There is probably several times the price difference between the automatic surface mount machine made in China and that made in other countries. The price of other countries’ aut...
    Read more
  • The Only Mainland Chinese SMT Brand to be Listed on Wikipedia——NeoDen!

    The Only Mainland Chinese SMT Brand to be Listed on Wikipedia——NeoDen!

    We are very happy that NeoDen can be included in Wikipedia and become the only pick and place machine brand included in mainland China! This is the affirmation of our company’s products and the trust of our NeoDen brand. We will also continue to provide SMT enthusiasts with better quality ...
    Read more
  • New Product! NeoDen9 Pick and Place Machine On Hot Sale!

    New Product! NeoDen9 Pick and Place Machine On Hot Sale!

    Customers have been consulting with us about the 6 head pick and place machine, today, it’s officially on sale! 6 placement heads Equips with 2 mark cameras 53 slots tape reel feeders patented sensor technology C5 precision ground screw   1. NeoDen independent Linux software, to ensu...
    Read more
  • Why Is Flux So Important for PCBA Circuit Board Welding?

    Why Is Flux So Important for PCBA Circuit Board Welding?

    1. Flux welding principle Flux can bear the welding effect, because the metal atoms are close to each other after the diffusion, dissolution, infiltration and other effects. In addition to the need to meet the removal of oxides and pollutants in the activation performance, but also to meet the no...
    Read more
  • What are The Advantages and Disadvantages of BGA Packaged?

    What are The Advantages and Disadvantages of BGA Packaged?

    I. BGA packaged is the packaging process with the highest welding requirements in PCB manufacturing. Its advantages are as follows: 1. Short pin, low assembly height, small parasitic inductance and capacitance, excellent electrical performance. 2. Very high integration, many pins, large pin spaci...
    Read more
  • Structure Composition of Reflow Oven

    Structure Composition of Reflow Oven

    NeoDen IN6 Reflow oven 1. Reflow soldering oven air flow system: high air convection efficiency, including speed, flow, fluidity and penetration capacity. 2. SMT welding machine heating system: hot air motor, heating tube, thermocouple, solid-state relay, temperature control device, etc. 3. Reflo...
    Read more
  • What Are The Maintenance Methods of Reflow Oven?

    What Are The Maintenance Methods of Reflow Oven?

    SMT Reflow Oven Stop reflow oven and reduce the temperature at room temperature (20~30 degrees) before maintenance. 1. Clean the exhaust pipe: clean the oil in the exhaust pipe with cleaning agent soaked in a rag. 2. Clean the dust of the drive sprocket: clean the dust of the drive sprocket with ...
    Read more
  • How Does SMT Equipment Collect Data?

    How Does SMT Equipment Collect Data?

    Data acquisition method of SMT machine: SMT is the process of attaching SMD device to PCB board, which is the key technology of SMT assembly line. SMT pick and place machine has complex control parameters and high precision requirements, so it is the key acquisition equipment object in this proje...
    Read more
  • What Are The Common Professional Terms of SMT Processing That You Need to Know? (II)

    What Are The Common Professional Terms of SMT Processing That You Need to Know? (II)

    This paper enumerates some common professional terms and explanations for the assembly line processing of SMT machine. 21. BGA BGA is short for “Ball Grid Array”, which refers to an integrated circuit device in which the device leads are arranged in a spherical grid shape on the botto...
    Read more