SMT khetha kwaye ubeke umatshini Neoden K1830

Inkcazelo emfutshane:

  • I-Nozzle qty kunye nosetyenziso lwesoftware yenza isantya sokubekwa kwe-N8 sinyuke nge-10-20%
  • Unxibelelwano olupheleleyo lwe-Ethernet lugcina umatshini usebenza kwindawo ezinzileyo, echasene nokuphazamiseka
  • Iindlela ezahlukeneyo zoluvo ezitsha zifakwe kumatshini: Irula yemagnethi yegridi yeXY;Izinzwa ezizimeleyo ze-nozzle phezulu-phantsi kunye nokujikeleza;Kwakhona kunye nenzwa yokuhlolwa ukuba imilomo kwinqanaba elifanayo
  • Iikhamera zophawu oluchanekileyo oluphezulu kunye nombono ophaphazelayo


Iinkcukacha zeMveliso

FAQ

Iithegi zeMveliso

Umzekelo NeoDen-K1830
Intloko yeNozzle qty 8
I-reel tape feeder qty max. 66
I-tray feeder qty 10
PCB ubukhulu max. 760*300mm (phantsi kwesigaba esinye)
Ubungakanani obukhoyo becandelo 0201 (umxhasi wombane), 0402-1210
I-IC iyafumaneka QFP, SSOP, QFN, BGA
Ukuchaneka kokubekwa 0.01mm
Ubude obukhoyo buphezulu. 18mm
Ukubonelela ngomoya >0.6MPa
Amandla 500W
I-Voltage 220/ 110V
Isantya esiphezulu. 16,000cph
Ukuqwalaselwa kwecandelo Umbono ophaphazelayo
PCB ukuqondwa Ikhamera yophawu oluchanekileyo oluphezulu
PCB umkhombandlela wodluliselo Ekhohlo→ekunene

Ukuchaneka:

Inkqubo yokulawula i-loop evaliweyo inokuqonda inkqubo yempendulo echanekileyo ephezulu.

Ukusebenza okulula:

Qonda ukusetwa kwe-batch feeder'indawo yokuchola ngaxeshanye Qonda ukuphakama kwe-batch feeder's pick-up height ngaxeshanye

Iikhamera zamanqaku aphindwe kabini zinokufikelela kwindawo yesondla ngasinye

Xhasa zombini i-feeder yombane kunye ne-pneumatic feeder, ukhetho lwe-feeder luguquguquka ngakumbi

Izinto eziluncedo xa kuthelekiswa no-N7:

Isiqingatha somxhasi ngakumbi;Iireyili zangaphakathi zizinzile ngakumbi;Ukuchaneka kokubeka okuphezulu

Ubume boomatshini bunengqiqo ngakumbi

IMG_9370
IMG_9434

  • Ngaphambili:
  • Okulandelayo:

  • Q1:Zeziphi iimveliso ozithengisayo?

    A: Inkampani yethu ithengisa ngezi mveliso zilandelayo:

    Izixhobo ze-SMT

    Izincedisi ze-SMT: I-Fieder, iinxalenye ze-Feeder

    Imilomo ye-SMT, umatshini wokucoca umlomo, isihluzo sombhobho

     

    Q2:Ndingayifumana nini ikowuteshini?

    A: Sidla ngokucaphula kwiiyure ezisi-8 emva kokuba sifumene umbuzo wakho.Ukuba ungxamiseke kakhulu ukufumana ixabiso, nceda usixelele ukuze siwuthathele ingqalelo umbuzo wakho.

     

    Q3:Ndingandwendwela umzi-mveliso wakho?

    A: Ngazo zonke iindlela, sikwamkela ngezandla ezishushu ukufika kwakho, Ngaphambi kokuba uhambe kwilizwe lakho, nceda usazise.Siza kukubonisa indlela kwaye silungiselele ixesha lokukuthatha ukuba kunokwenzeka.

    Thumela umyalezo wakho kuthi:

    Bhala umyalezo wakho apha kwaye uwuthumele kuthi

    Thumela umyalezo wakho kuthi: