Reflow oven maintenance mainly in the following areas.
1. Cleaning
Regular cleaning reflow soldering machine is an important part of maintenance. Need to disconnect the equipment power supply, wait for the equipment to cool down, use a mild detergent and soft cloth to clean the surface and interior of the equipment. Pay special attention to cleaning the soldering area and conveyor belt to ensure that the soldering area is free of residue. It is also important to keep the electrical wiring clean.
2. Tuning
Reflow oven drive components need to be lubricated regularly to ensure the normal operation of the equipment and extend the service life. Appropriate lubricants should be used, in accordance with the guidelines of the equipment manual, lubrication of transmission components. Be careful to avoid excessive lubrication, so as not to affect the operation of the equipment. In addition, it is also necessary to lubricate the drive roller chain, such as every two months with a high-temperature lubricant coating wash.
3. Hot air system maintenance
Reflow oven hot air system is critical to the quality of welding. Should regularly check the hot air system, clean the hot air outlet and fan, to ensure that the hot air system works properly. If abnormalities are found, timely repair or replacement of key components of the hot air system.
4. Conveyor belt maintenance
The conveyor belt of reflow soldering is a key component in the soldering process. The tension of the conveyor belt should be checked regularly to ensure smooth operation. At the same time, check the wear and tear of the conveyor belt, and replace the badly worn conveyor belt in time. When adjusting the tension of the conveyor belt, keep the tensioning slide clean and dust-free.
5. Temperature control system maintenance
The temperature control system of reflow oevn plays an important role in soldering quality. Temperature sensors and controllers should be checked regularly to ensure that the temperature control system is accurate and reliable. If the temperature control is found to be inaccurate, timely adjustment or replacement of key components of the temperature control system.
6. Check the welding quality
Reflow oven maintenance also includes regular checks on the quality of welding, by checking the appearance of the welded joints and welding connection firmness, to determine whether the welding quality in line with the requirements, if found that the welding quality is poor, timely adjustment of the parameters of the equipment or the replacement of welding materials.
7. Routine maintenance
Routine maintenance includes tasks such as cleaning the equipment, lubricating the transmission parts and checking the welding quality. Daily maintenance is recommended to ensure the normal operation of the equipment and stable welding quality.
8. Regular maintenance
Regular maintenance includes tasks such as checking and maintaining the hot air system, conveyor belt and temperature control system. It is recommended to carry out regular maintenance once a week to ensure the long-term stable operation of the equipment.
The above is the reflow oven maintenance points. Correct maintenance can ensure the normal operation of the equipment, extend the service life and improve the welding quality.
Features of NeoDen IN6 Reflow oven
The table-top design of the product makes it a perfect solution for production lines with versatile requirements. It is designed with internal automation that helps operators provide streamlined soldering.
The new model has bypassed the need for a tubular heater, which provides even temperature distribution throughout the reflow oven. By soldering PCBs in even convection, all components are heated at the same rate.
Temperature can be controlled with extreme accuracy—users can pinpoint heat within 0.2°C.
An internal temperature sensor ensures full control of the heating chamber and can reach optimal temperatures in as little as fifteen minutes.
Post time: Mar-26-2024