Neoden PCB automatic production line introduction

PCB loader

1、Solid and stable design.

2、PLC control system.

3、Light touch LED membrane switch or touch screen control panel

4、options available

5、Top and bottom pneumatic clamps to secure magazine rack

6、Pressure regulated on pusher’s to prevent board damage

7、Self diagnostic error code display

8、SMEMA compatible

 Automatic solder printer

1) PCB parameter

Maximum board size(X *Y):450mm*350mm

Minimum board size(X*Y):50mm*50mm

PCB thickness:0.4mm~6mm Warpage:≤1%Diagonal

Maximum board weight:3KG

Maximum board weight:Configuration to 3mm

Maximum bottom gap:20mm

Transfer speed: 1500mm/s(Max)

Transfer orbit direction: L-R,R-L,L-L,R-R

2) Printing parameters

Printing head: Floating intelligent printing head (two independent direct connected motors)

Template frame size: 470mm*370mm~737 mm*737 mm

Maximum printing area(X*Y): 450mm*350mm

Squeegee type: Steel/Glue Squeegee（Angel 45°/50°/60° matching the printing process）

Squeegee length: 300mm (optional with length of 200mm-500mm)

Squeegee height: 65±1mm

Squeegee thickness: 0.25mm Diamond-like carbon coating

Printing mode: Single or double Squeegee printing

Demoulding length: 0.02mm-12mm

Printing speed: 0~200mm/s

Printing pressure: 0.5kg-10Kg

Printing stroke: ±200mm (From the center)

 Conveyor

Conveyor Length:0.8m

Gross Weight:49KGs

Packing Size:88*72*31cm

Power Supply:220V

 Pick and place machine NeoDen K1830

1. 8 Synchronized Nozzles which ensure a repeatable placement accuracy with high speed
2. Machine runs on highly stable and secure Linux operating system
3. Double mark cameras to reach at extreme end feeders for better calibration
4. High resolution and high speed component camera system improves the overall speed of the machine
5. Ethernet communication interface for all internal signal travel makes the machine to perform more stable and flexible
6. Closed loop Servo control system with feedback makes the machine to function more accurate
7. Picking location of pneumatic feeder can be calibrated automatically and promptly,to ensure easy operation and high efficiency
8. PCB location can be calibrated automatically and promptly,based on the correct and specific placement request

 Reflow oven IN12

1. Built-in welding smoke filtering system, effective filtration of harmful gases, elegant appearance and eco-friendly, more in line with the high-end use environment.

2. The control system has features of high integration, timely response, low failure rate and convenient maintenance.

3. The unique design of heating module has the characteristics of high temperature control accuracy, uniform temperature distribution in the thermal compensation area, high thermal compensation efficiency and low power consumption.

4. Hot air convection, excellent soldering performance.

5. High-performance aluminum alloy heating plate instead of heating pipe, both energy-saving and high-efficient, and transverse temperature deviation is significantly reduced compare to the similar reflow oven products in the market.

 PCB unloader

1. Solid and stable design.
2. PLC control system.
3. Light touch LED membrane switch or touch screen control panel options available.
4. Top and bottom pneumatic clamps to secure magazine rack.
5. Pressure regulated on pusher’s to prevent board damage.
6. Self diagnostic error code display.
7. SMEMA compatible.