News
-
How to Avoid The Error of Pick and Place Machine?
Automatic pick and place machine is a very precise automatic production equipment. The way to prolong the service life of automatic SMT machine is to maintain the automatic pick and place machine strictly and have the corresponding operating procedures and related requirements for the automatic p...Read more -
What Are The Important PCB Routing Rules That Should be Followed When Using High-speed Converters?
Should the AGND and DGND ground layers be separated? The simple answer is that it depends on the situation, and the detailed answer is that they are usually not separated. Because in most cases, separating the ground layer will only increase the inductance of the return current, which brings more...Read more -
What Are The 6 Key Steps in Chip Manufacturing?
In 2020, more than a trillion chips were produced worldwide, which equates to 130 chips owned and used by each person on the planet. Yet even so, the recent chip shortage continues to show that this number has not yet reached its upper limit. Although chips can already be produced on such a large...Read more -
What Is HDI Circuit Board?
I. What is HDI board? HDI board (High Density Interconnector), that is, high-density interconnect board, is the use of micro-blind buried hole technology, a circuit board with a relatively high density of line distribution. HDI board has an inner line and outer line, and then the use of drilling,...Read more -
MOSFET Device Selection of The 3 Major Rules
MOSFET device selection to consider all aspects of factors, from small to choose N-type or P-type, package type, large to MOSFET voltage, on-resistance, etc., different application requirements vary. The following article summarizes the MOSFET device selection of the 3 major rules, I believe that...Read more -
How To Transport and Store PCBA?
In order to ensure the quality of PCBA, each processing link of PCBA placement and plug-in function test must be strictly controlled, and the transportation and storage of PCBA is no exception, because in the process of transportation and storage, if the protection is not proper, it may cause the...Read more -
LED Expo Mumbai 2022 Exhibition
NeoDen India distributor-ChipMax will attend LED Expo Mumbai 2022 Exhibition Welcome to have the first experience at the booth Booth Number: J12 Date: 19-21 May 2022 City: Mumbal Web: http://neodenindia.com/index.php LED Expo Mumbai 2022: Event Profile LED Expo Mumbai 2022 is India’s onl...Read more -
What are the advantages of automatic wave soldering?
Suitable for high productivity lead-free process requirements. Self-developed tenth generation intelligent control software, process making, curve chart, product technology, automatic heating function. The noise of the equipment is below 60 decibels. Automatic positioning spraying and tin sprayi...Read more -
A New Way to Quickly Create Structures in IC Packages
In the latest SPB 17.4 release, the Allegro® Package Designer Plus tool ushers in a new twist in wiring technology – the popular concept of “over-hole structures” has been renamed “structures” because of its increasing flexibility and applicability to many different ...Read more -
Why SMT needs a reflow oven tray with a full carrier?
SMT reflow oven is an essential soldering equipment in the SMT process, which is actually a combination of a baking oven. Its main function is to let the paste solder in the reflow oven, the solder will be melted at high temperatures after the solder can make the SMD components and circuit boards...Read more -
How to Optimize PCB Design?
1. Figure out which are the programmable devices on the board. The devices on the board are not all programmable within the system. For example, parallel devices are usually not allowed to do so. For programmable devices, the serial programming capability of the ISP is essential to maintain desig...Read more -
The 4 Characteristics of Radio-frequency Circuits
This article explains the 4 basic characteristics of RF circuits from four aspects: RF interface, small expected signal, large interference signal, and interference from adjacent channels, and gives important factors that need special attention in the PCB design process. RF circuit simulation of ...Read more
