SMT AOI Machine

Highlight and details

NeoDen ND800 comprehensively detects all types of defects that may occur during SMT and DIP production, ensuring complete PCB quality:

Inspection Items:

• Stencil printing: Solder unavailability, insufficient or excessive solder, solder misalignment, bridging, stain, scratch etc.
• Component defect: missing or excessive component, misalignment, uneven, edging, opposite mounting, wrong or bad component etc.
• DIP: Missing parts, damage parts, offset, skew, inversion, etc
• Soldering defect: excessive or missing solder, empty soldering, bridging, solder ball, IC NG ,copper stain etc.

Optical system:

• Camera: 5 million pix full color high speed industrial digital camera, 20 million pix camera optional.
• Lens resolution: 10um/15um/18um/20um/25um, can be custom-made.
• Lighting source Annular stereo multi-channel color light, RGB/RGBW/RGBR/RWBR optional.
• Minimum component: 0201 chip, 0.3 pitch IC.

PCB Thickness: 0.3mm~5mm
Max. PCB Size (X x Y): 400mm x 360mm
Min. PCB Size (Y x X): 50mm x 50mm
Max. Bottom Gap: 75mm
Max. Top Gap: 35mm
Moving speed: 830mm/Sec(Max)
Transmission height from the ground: 900±20mm
Air pressure: 0.4 – 0.8MPa
PCB bending: ＜5mm or 3% of PCB Diagonal length
Power: AC220V,50/60Hz,1.5KW
Machine dimension: 980mm * 980mm * 1620mm

About NeoDen

FAQ

Q1. How can I place an order?

A. You can contact any of our sales person for an order.

Please provide the details of your requirements as clear as possible.

So we can send you the offer at the first time.

For designing or further discussion, it is better to contact us with Skype, E-mail or WhatsApp or other instant ways, in case of any delays.

Q2. How far is your factory from the airport and train station?

A. From airport about 2 hours by car, and from train station about 30 minutes.

We can pick up you.

Q3. Is there the products tested before shipping?
A. Yes, of course.

All of our conveyor belt we all will has been 100% QC before shipping.

We test every batch every day.

Maintenance of Equipment

• At the end of the day, turn off the power supply of the computer and equipment, and suck the dust on the equipment table surface with a vacuum cleaner. If there is no vacuum cleaner, dry towel can be used to wipe off the board dust and the like from the bench surface. Note: do not blow the surface with an air gun. The dust and debris will be blown into the top of the equipment and will attach to the screw rod, guide rail or lens, which will affect the accuracy and service life of the equipment. If metal debris is blown into the electrical appliance, there may be short circuit and fire.
• Wipe the dirt on the equipment surface with towel. Note: do not use organic solvent (such as board washing water) to wipe the surface of the equipment, otherwise the paint on the surface of the equipment will be damaged.
• Maintain the screw rod and guide rail every month. Clean the old oil with clean white cloth, and then evenly brush the oil on the surface of the screw rod and guide rail with No.10 or No.11 oil brush. Note: grease and lubricating oil must be of good quality. Otherwise, the surface friction on the screw rod or guide rail will be increased, thus shortening the service life of the screw rod and guide rail and affecting the accurate positioning of the machine. Recommended: Germany OKS Super Grease OKS422, or referring to the grease used in mounter maintenance.
• Clean the filter cotton on the left side of the industrial computer panel every 1 month. Note: filter cotton should be dried after cleaning and then put back in place.
• Check the light source every 3 months. Since the brightness of LED lamps may change slightly after half a year, the light source needs to be inspected once to ensure normal inspection.
• Calibrate the camera every three months. Since the camera keeps moving every day, it is necessary to check whether the camera screws and lens screw are fixed properly and whether the calibration value is within the acceptable range.

Hot Tags: smt aoi machine, China smt aoi machine manufacturers, suppliers, factory